Get 12 powerful software programs for DPF, FAP, EGR, and Immo Off with 2018 tuning files
This comprehensive collection of software programs will provide the necessary tools for removing DPF, FAP, EGR, and Immo Off with ease. Get the best performance from your vehicle with these powerful and professional software programs.
TESTED AND WORKING VERY GOOD ON WINDOWS XP AND WINDOWS 7
(Hardware and cable not included)
Softwares included:
1-[DUMP COLLECTION] TUNE AND ORI FILES [+ 20.000] [+20 GB]
1.1-TUNED FILE DATABASE [STAGE1 – STAGE 2 – STAGE 3]
Cars list is very big, more than 10.000 ecu files. Here is the link
LIST_____obd2technologyTUNED FILE DATABASE [STAGE1 – STAGE 2]
2- AES UNIVERSAL EGR REMOVER 2.2
works for Egr rmoving. Here is the complete car brands and ecus list:
Aes egr remover 2.2 cars ecu list
3- CARSOFTWARE 5.2
immo and egr off program
4- MTX DTC Remover 1.8.5
Software for removing diagnostic trouble codes in cars, only simple ones. This is a software for cars from 2001 and up to 2013.
5- MTX FAP DPF REMOVER 1.4.11
6- P REMOVER 2017 [ALL IN ONE] (3 Software)
7- PROFESIONAL EGR REMOVER 1.5.5
8- Professional EGR DPF Remover 2016 (2 SOFTWARES below):
- 8.1- P(Professional) DPF REMOVER 3.0
Software designed to disable diesel particulate filters (DPF/FAP) programmatically. The software contains solutions for various car models, providing a comprehensive approach to disabling DPF and FAP filters. The methods employed by the software include disabling the dpf filter through the configuration table and manipulating sensor parameters in areas that are normally inaccessible during engine operation, as well as other methods. The goal of using this tool is to minimize the chances of failure when attempting to disable the particulate filter.
To remove the DPF/FAP, users need to run the program, select the car brand, and choose the corresponding block. Then, they load the original firmware from the car’s ECU into the program, and the “Professional DPF Remover v3.0.0” takes care of the rest. The user must wait for the program to give a successful operation message, after which they can save the modified firmware and write it back to the car’s ECU. If the program doesn’t recalculate the checksum, the user’s flasher should handle this task when recording the modified firmware.
- 8.2- P(Professional) EGR REMOVER 3.0
This software is designed to remove the Exhaust Gas Recirculation (EGR) system from the Engine Control Unit (ECU) dump, effectively disabling it programmatically both in the EGR maps and the Diagnostic Trouble Code (DTC) error mask. The software automatically detects the relevant area in the ECU dump and applies comprehensive solutions, depending on the specific car and ECU block. After the process is completed, user only needs to save the firmware with the EGR shutdown already implemented.
Additionally, the software supports HotStart tasks and the removal of certain immobilizer algorithms (immo algos). For supported cars, the EGR, HotStart, and Immobilizer algorithms will still function correctly after their removal. The software uses a DAMOS database for some EGR valve models, no additional hardware is needed to work with Professional EGR Remover. User will have to read/write a dump to the ECU by recalculating checksums, which can be done with an appropriate flasher tool
9- ECUSAFE 2.0
It offers functions to remove or delete components such as the EGR (Exhaust Gas Recirculation) system, DPF (Diesel Particulate Filter), FAP (Filtre à Particules) system, and to remove speed limiters or AdBlue systems.
The basic process of using ECUsafe 2.0 involves opening the original ECU file that you want to modify, selecting the car brand and family, decoding the file, and then saving the modified file.
10- VOLTA 1.2
Universal software for DPF/EGR/IMMO/LAMBDA, FAP off (remove/clean) by dump
System Requirements:
– Windows XP, Vista, 7; 8 32/64 bits
– CPU: Pentium dual core /Athlon 1.06 GHz or higher
– RAM: 6 GB of system memory
– Hard Drive: 10 gb of available space
–Usb port 2.0 for connecting the elm327 scanner
Shipping
The link will be instantly available once payment is confirmed. It will be seen in the downloads section of your obd2technology account.
Payments
WE ACCEPT THE DIFFERENT PAYMENT METHODS ADVERTISED ON THE SITE, SUCH AS PAYPAL, VISA AND MASTERCARD CARDS AND BITCOIN
How To Place An Order, download and common questions:
Reviews
There are no reviews yet